dmesg - Seagate ST3500630AS
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.51-1
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000077000000 (usable)
BIOS-e820: 0000000077000000 - 000000007f000000 (reserved)
BIOS-e820: 000000007f000000 - 000000007fd90000 (usable)
BIOS-e820: 000000007fe90000 - 000000007fee0000 (reserved)
BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS)
BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data)
BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved)
BIOS-e820: 00000000f0000000 - 00000000f2000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: HP-Pavilion KJ387AA-ABA a6403w/Napa, BIOS 5.20 10/24/2008
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x7fd90 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CCFFF write-protect
CD000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 07FF00000 mask FFFF00000 uncachable
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
found SMP MP-table at [ffff8800000f3fb0] f3fb0
initial memory mapped : 0 - 20000000
Base memory trampoline at [ffff88000009a000] 9a000 size 20480
init_memory_mapping: 0000000000000000-000000007fd90000
0000000000 - 007fc00000 page 2M
007fc00000 - 007fd90000 page 4k
kernel direct mapping tables up to 7fd90000 @ 1fffc000-20000000
RAMDISK: 36bfc000 - 375f6000
ACPI: RSDP 00000000000f8240 00014 (v00 HPQOEM)
ACPI: RSDT 000000007fee3000 0003C (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000)
ACPI: FACP 000000007fee3080 00084 (v02 HPQOEM SLIC-CPC 42302E31 AWRD 00000000)
ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20110623/tbfadt-560)
ACPI: DSDT 000000007fee3140 052A0 (v01 HPQOEM SLIC-CPC 00001000 MSFT 03000000)
ACPI: FACS 000000007fee1800 00040
ACPI: SLIC 000000007fee8400 00176 (v01 HPQOEM SLIC-CPC 00000001 AWRD 00000001)
ACPI: HPET 000000007fee8640 00038 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000098)
ACPI: MCFG 000000007fee8680 0003C (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000)
ACPI: APIC 000000007fee8580 00098 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000)
ACPI: SSDT 000000007fee8d20 00380 (v01 HPQOEM SLIC-CPC 00003000 INTL 20040311)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-000000007fd90000
Initmem setup node 0 0000000000000000-000000007fd90000
NODE_DATA [000000007fd8b000 - 000000007fd8ffff]
[ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880075000000-ffff880076bfffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal empty
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x00077000
0: 0x0007f000 -> 0x0007fd90
On node 0 totalpages: 490783
DMA zone: 56 pages used for memmap
DMA zone: 5 pages reserved
DMA zone: 3922 pages, LIFO batch:0
DMA32 zone: 7104 pages used for memmap
DMA32 zone: 479696 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10de8201 base: 0xfeff0000
SMP: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
PM: Registered nosave memory: 0000000077000000 - 000000007f000000
Allocating PCI resources starting at 7ff00000 (gap: 7ff00000:70100000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88007fa00000 s82944 r8192 d23552 u524288
pcpu-alloc: s82944 r8192 d23552 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 483618
Policy zone: DMA32
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 1915272k/2094656k available (3426k kernel code, 131524k absent, 47860k reserved, 3312k data, 576k init)
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:33024 nr_irqs:712 16
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 1799.776 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3599.55 BogoMIPS (lpj=7199104)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor disabled by boot time parameter
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
ACPI: Core revision 20110623
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Pentium(R) Dual CPU E2160 @ 1.80GHz stepping 0d
Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
PEBS disabled due to CPU errata.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1
smpboot cpu 1: start_ip = 9a000
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 2 CPUs
Total of 2 processors activated (7199.53 BogoMIPS).
devtmpfs: initialized
PM: Registering ACPI NVS region at 7fee0000 (12288 bytes)
print_constraints: dummy:
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem 0xf0000000-0xf1ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf1ffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: SSDT 000000007fee8700 0022A (v01 PmRef Cpu0Ist 00003000 INTL 20040311)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0022A (v01 PmRef Cpu0Ist 00003000 INTL 20040311)
ACPI: SSDT 000000007fee8bc0 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20040311)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20040311)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: No dock devices found.
HEST: Table not found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0x7ff00000-0xfebfffff]
pci 0000:00:00.0: [10de:07c1] type 0 class 0x000600
pci 0000:00:00.1: [10de:07cb] type 0 class 0x000500
pci 0000:00:01.0: [10de:07cd] type 0 class 0x000500
pci 0000:00:01.1: [10de:07ce] type 0 class 0x000500
pci 0000:00:01.2: [10de:07cf] type 0 class 0x000500
pci 0000:00:01.3: [10de:07d0] type 0 class 0x000500
pci 0000:00:01.4: [10de:07d1] type 0 class 0x000500
pci 0000:00:01.5: [10de:07d2] type 0 class 0x000500
pci 0000:00:01.6: [10de:07d3] type 0 class 0x000500
pci 0000:00:02.0: [10de:07d6] type 0 class 0x000500
pci 0000:00:03.0: [10de:07d7] type 0 class 0x000601
pci 0000:00:03.1: [10de:07d8] type 0 class 0x000c05
pci 0000:00:03.1: reg 10: [io 0xff00-0xff3f]
pci 0000:00:03.1: reg 20: [io 0x1c00-0x1c3f]
pci 0000:00:03.1: reg 24: [io 0x1c80-0x1cbf]
pci 0000:00:03.1: PME# supported from D3hot D3cold
pci 0000:00:03.2: [10de:07d9] type 0 class 0x000500
pci 0000:00:03.4: [10de:07c8] type 0 class 0x000500
pci 0000:00:04.0: [10de:07fe] type 0 class 0x000c03
pci 0000:00:04.0: reg 10: [mem 0xeffff000-0xefffffff]
pci 0000:00:04.0: supports D1 D2
pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.1: [10de:056a] type 0 class 0x000c03
pci 0000:00:04.1: reg 10: [mem 0xefffe000-0xefffe0ff]
pci 0000:00:04.1: supports D1 D2
pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:08.0: [10de:056c] type 0 class 0x000101
pci 0000:00:08.0: reg 20: [io 0xfc00-0xfc0f]
pci 0000:00:09.0: [10de:07fc] type 0 class 0x000403
pci 0000:00:09.0: reg 10: [mem 0xefff4000-0xefff7fff]
pci 0000:00:09.0: PME# supported from D3hot D3cold
pci 0000:00:0a.0: [10de:056d] type 1 class 0x000604
pci 0000:00:0b.0: [10de:056e] type 1 class 0x000604
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0c.0: [10de:056f] type 1 class 0x000604
pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0d.0: [10de:056f] type 1 class 0x000604
pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0e.0: [10de:07f0] type 0 class 0x000101
pci 0000:00:0e.0: reg 10: [io 0x09f0-0x09f7]
pci 0000:00:0e.0: reg 14: [io 0x0bf0-0x0bf3]
pci 0000:00:0e.0: reg 18: [io 0x0970-0x0977]
pci 0000:00:0e.0: reg 1c: [io 0x0b70-0x0b73]
pci 0000:00:0e.0: reg 20: [io 0xf700-0xf70f]
pci 0000:00:0e.0: reg 24: [mem 0xefff8000-0xefff9fff]
pci 0000:00:0f.0: [10de:07dc] type 0 class 0x000200
pci 0000:00:0f.0: reg 10: [mem 0xefffd000-0xefffdfff]
pci 0000:00:0f.0: reg 14: [io 0xf600-0xf607]
pci 0000:00:0f.0: reg 18: [mem 0xefffc000-0xefffc0ff]
pci 0000:00:0f.0: reg 1c: [mem 0xefffb000-0xefffb00f]
pci 0000:00:0f.0: supports D1 D2
pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.0: [10de:07e1] type 0 class 0x000300
pci 0000:00:10.0: reg 10: [mem 0xed000000-0xedffffff]
pci 0000:00:10.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:10.0: reg 1c: [mem 0xee000000-0xeeffffff 64bit]
pci 0000:00:10.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:06.0: [14f1:2f20] type 0 class 0x000780
pci 0000:01:06.0: reg 10: [mem 0xefbe0000-0xefbeffff]
pci 0000:01:06.0: reg 14: [io 0xcf00-0xcf07]
pci 0000:01:06.0: PME# supported from D3hot D3cold
pci 0000:01:07.0: [1106:3044] type 0 class 0x000c00
pci 0000:01:07.0: reg 10: [mem 0xefbc0000-0xefbc07ff]
pci 0000:01:07.0: reg 14: [io 0xefbc0000-0xefbc007f]
pci 0000:01:07.0: supports D2
pci 0000:01:07.0: PME# supported from D2 D3hot D3cold
pci 0000:00:0a.0: PCI bridge to [bus 01-01] (subtractive decode)
pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:0a.0: bridge window [mem 0xefb00000-0xefbfffff]
pci 0000:00:0a.0: bridge window [mem 0xefa00000-0xefafffff pref]
pci 0000:00:0a.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:0a.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:0a.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:0a.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:0a.0: bridge window [mem 0x7ff00000-0xfebfffff] (subtractive decode)
pci 0000:00:0b.0: PCI bridge to [bus 02-02]
pci 0000:00:0b.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:0b.0: bridge window [mem 0xef900000-0xef9fffff]
pci 0000:00:0b.0: bridge window [mem 0xef800000-0xef8fffff 64bit pref]
pci 0000:00:0c.0: PCI bridge to [bus 03-03]
pci 0000:00:0c.0: bridge window [io 0xe000-0xefff]
pci 0000:00:0c.0: bridge window [mem 0xef700000-0xef7fffff]
pci 0000:00:0c.0: bridge window [mem 0xefe00000-0xefefffff 64bit pref]
pci 0000:00:0d.0: PCI bridge to [bus 04-04]
pci 0000:00:0d.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:0d.0: bridge window [mem 0xefd00000-0xefdfffff]
pci 0000:00:0d.0: bridge window [mem 0xefc00000-0xefcfffff 64bit pref]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0c
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LIGP] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LUBA] (IRQs 5 *7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LU1B] (IRQs 5 7 9 10 11 14 15) *0
ACPI: PCI Interrupt Link [LU2B] (IRQs 5 7 9 10 11 14 15) *0
ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 *15)
ACPI: PCI Interrupt Link [LAZA] (IRQs 5 *7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [AUBA] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [AUB2] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [AU1B] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [AU2B] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
vgaarb: device added: PCI:0000:00:10.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:10.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
pci 0000:01:07.0: no compatible bridge window for [io 0xefbc0000-0xefbc007f]
reserve RAM buffer: 000000000009f400 - 000000000009ffff
reserve RAM buffer: 0000000077000000 - 0000000077ffffff
reserve RAM buffer: 000000007fd90000 - 000000007fffffff
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
hpet0: 3 comparators, 32-bit 25.000000 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000dffff window]
pnp 00:00: [mem 0x7ff00000-0xfebfffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [io 0x1000-0x107f]
pnp 00:01: [io 0x1080-0x10ff]
pnp 00:01: [io 0x1400-0x147f]
pnp 00:01: [io 0x1480-0x14ff]
pnp 00:01: [io 0x1800-0x187f]
pnp 00:01: [io 0x1880-0x18ff]
pnp 00:01: [mem 0xfec80000-0xfecbffff]
pnp 00:01: [mem 0xfefe0000-0xfefe01ff]
pnp 00:01: [mem 0xfefe1000-0xfefe10ff]
pnp 00:01: [mem 0x77000000-0x7effffff]
system 00:01: [io 0x1000-0x107f] has been reserved
system 00:01: [io 0x1080-0x10ff] has been reserved
system 00:01: [io 0x1400-0x147f] has been reserved
system 00:01: [io 0x1480-0x14ff] has been reserved
system 00:01: [io 0x1800-0x187f] has been reserved
system 00:01: [io 0x1880-0x18ff] has been reserved
system 00:01: [mem 0xfec80000-0xfecbffff] has been reserved
system 00:01: [mem 0xfefe0000-0xfefe01ff] has been reserved
system 00:01: [mem 0xfefe1000-0xfefe10ff] has been reserved
system 00:01: [mem 0x77000000-0x7effffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [io 0x0010-0x001f]
pnp 00:02: [io 0x0022-0x003f]
pnp 00:02: [io 0x0044-0x005f]
pnp 00:02: [io 0x0062-0x0063]
pnp 00:02: [io 0x0065-0x006f]
pnp 00:02: [io 0x0074-0x007f]
pnp 00:02: [io 0x0091-0x0093]
pnp 00:02: [io 0x00a2-0x00bf]
pnp 00:02: [io 0x00e0-0x00ef]
pnp 00:02: [io 0x04d0-0x04d1]
pnp 00:02: [io 0x0800-0x0805]
pnp 00:02: [io 0x0290-0x0297]
pnp 00:02: [io 0x0880-0x088f]
pnp 00:02: disabling [io 0x0010-0x001f] because it overlaps 0000:01:07.0 BAR 1 [io 0x0000-0x007f]
pnp 00:02: disabling [io 0x0022-0x003f] because it overlaps 0000:01:07.0 BAR 1 [io 0x0000-0x007f]
pnp 00:02: disabling [io 0x0044-0x005f] because it overlaps 0000:01:07.0 BAR 1 [io 0x0000-0x007f]
pnp 00:02: disabling [io 0x0062-0x0063] because it overlaps 0000:01:07.0 BAR 1 [io 0x0000-0x007f]
pnp 00:02: disabling [io 0x0065-0x006f] because it overlaps 0000:01:07.0 BAR 1 [io 0x0000-0x007f]
pnp 00:02: disabling [io 0x0074-0x007f] because it overlaps 0000:01:07.0 BAR 1 [io 0x0000-0x007f]
system 00:02: [io 0x04d0-0x04d1] has been reserved
system 00:02: [io 0x0800-0x0805] has been reserved
system 00:02: [io 0x0290-0x0297] has been reserved
system 00:02: [io 0x0880-0x088f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [dma 4]
pnp 00:03: [io 0x0000-0x000f]
pnp 00:03: [io 0x0080-0x0090]
pnp 00:03: [io 0x0094-0x009f]
pnp 00:03: [io 0x00c0-0x00df]
pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:04: [irq 0 disabled]
pnp 00:04: [irq 8]
pnp 00:04: [mem 0xfeff0000-0xfeff03ff]
pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:05: [io 0x0070-0x0073]
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:06: [io 0x0061]
pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:07: [io 0x00f0-0x00ff]
pnp 00:07: [irq 13]
pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:08: [mem 0xf0000000-0xf1ffffff]
system 00:08: [mem 0xf0000000-0xf1ffffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: [mem 0x000f0000-0x000fffff]
pnp 00:09: [mem 0xfeff0000-0xfeff00ff]
pnp 00:09: [mem 0x7fee0000-0x7fefffff]
pnp 00:09: [mem 0xffff0000-0xffffffff]
pnp 00:09: [mem 0x00000000-0x0009ffff]
pnp 00:09: [mem 0x00100000-0x7fedffff]
pnp 00:09: [mem 0xfec00000-0xfec00fff]
pnp 00:09: [mem 0xfee00000-0xfee00fff]
pnp 00:09: [mem 0xfeff0000-0xfeff03ff]
system 00:09: [mem 0x000f0000-0x000fffff] could not be reserved
system 00:09: [mem 0xfeff0000-0xfeff00ff] has been reserved
system 00:09: [mem 0x7fee0000-0x7fefffff] could not be reserved
system 00:09: [mem 0xffff0000-0xffffffff] has been reserved
system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:09: [mem 0x00100000-0x7fedffff] could not be reserved
system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:09: [mem 0xfeff0000-0xfeff03ff] could not be reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:10.0: BAR 6: assigned [mem 0x7ff00000-0x7ff1ffff pref]
pci 0000:01:07.0: BAR 1: assigned [io 0xc000-0xc07f]
pci 0000:00:0a.0: PCI bridge to [bus 01-01]
pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:0a.0: bridge window [mem 0xefb00000-0xefbfffff]
pci 0000:00:0a.0: bridge window [mem 0xefa00000-0xefafffff pref]
pci 0000:00:0b.0: PCI bridge to [bus 02-02]
pci 0000:00:0b.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:0b.0: bridge window [mem 0xef900000-0xef9fffff]
pci 0000:00:0b.0: bridge window [mem 0xef800000-0xef8fffff 64bit pref]
pci 0000:00:0c.0: PCI bridge to [bus 03-03]
pci 0000:00:0c.0: bridge window [io 0xe000-0xefff]
pci 0000:00:0c.0: bridge window [mem 0xef700000-0xef7fffff]
pci 0000:00:0c.0: bridge window [mem 0xefe00000-0xefefffff 64bit pref]
pci 0000:00:0d.0: PCI bridge to [bus 04-04]
pci 0000:00:0d.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:0d.0: bridge window [mem 0xefd00000-0xefdfffff]
pci 0000:00:0d.0: bridge window [mem 0xefc00000-0xefcfffff 64bit pref]
pci 0000:00:0a.0: setting latency timer to 64
pci 0000:00:0b.0: setting latency timer to 64
pci 0000:00:0c.0: setting latency timer to 64
pci 0000:00:0d.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0x7ff00000-0xfebfffff]
pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:01: resource 1 [mem 0xefb00000-0xefbfffff]
pci_bus 0000:01: resource 2 [mem 0xefa00000-0xefafffff pref]
pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:01: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:01: resource 8 [mem 0x7ff00000-0xfebfffff]
pci_bus 0000:02: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:02: resource 1 [mem 0xef900000-0xef9fffff]
pci_bus 0000:02: resource 2 [mem 0xef800000-0xef8fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
pci_bus 0000:03: resource 1 [mem 0xef700000-0xef7fffff]
pci_bus 0000:03: resource 2 [mem 0xefe00000-0xefefffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:04: resource 1 [mem 0xefd00000-0xefdfffff]
pci_bus 0000:04: resource 2 [mem 0xefc00000-0xefcfffff 64bit pref]
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
NET: Registered protocol family 1
ACPI: PCI Interrupt Link [AUBA] enabled at IRQ 23
ACPI: PCI Interrupt Link [AUB2] enabled at IRQ 22
pci 0000:00:10.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 10216k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1390285003.620:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 3760
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:0b.0: setting latency timer to 64
pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
pcieport 0000:00:0c.0: setting latency timer to 64
pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
pcieport 0000:00:0d.0: setting latency timer to 64
pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
intel_idle: does not run on family 6 model 15
ERST: Table is not found!
GHES: HEST is not enabled!
Linux agpgart interface v0.103
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 10
Mobile IPv6
NET: Registered protocol family 17
Registering the dns_resolver key type
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
rtc_cmos 00:05: setting system clock to 2014-01-21 06:16:45 UTC (1390285005)
Initializing network drop monitor service
Freeing unused kernel memory: 576k freed
Write protecting the kernel read-only data: 6144k
Freeing unused kernel memory: 652k freed
Freeing unused kernel memory: 688k freed
udevd[49]: starting version 175
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:04.1: setting latency timer to 64
ehci_hcd 0000:00:04.1: EHCI Host Controller
ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:04.1: debug port 1
ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
ehci_hcd 0000:00:04.1: irq 22, io mem 0xefffe000
ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
usb usb1: SerialNumber: 0000:00:04.1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:04.0: setting latency timer to 64
ohci_hcd 0000:00:04.0: OHCI Host Controller
ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:04.0: irq 23, io mem 0xeffff000
SCSI subsystem initialized
ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
firewire_ohci 0000:01:07.0: setting latency timer to 64
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (40 C)
libata version 3.00 loaded.
ACPI: Fan [FAN] (on)
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 3.2.0-4-amd64 ohci_hcd
usb usb2: SerialNumber: 0000:00:04.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21
forcedeth 0000:00:0f.0: setting latency timer to 64
firewire_ohci: Added fw-ohci device 0000:01:07.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x11
usb 1-2: new high-speed USB device number 3 using ehci_hcd
usb 1-2: New USB device found, idVendor=0480, idProduct=d010
usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-2: Product: External USB 3.0
usb 1-2: Manufacturer: Toshiba
usb 1-2: SerialNumber: 20130530005996
Initializing USB Mass Storage driver...
scsi0 : usb-storage 1-2:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
firewire_core: created device fw0: GUID 00016c200078280a, S400
forcedeth 0000:00:0f.0: ifname eth0, PHY OUI 0x732 @ 13, addr 00:1c:25:8c:90:b2
forcedeth 0000:00:0f.0: highdma pwrctl mgmt lnktim msi desc-v3
pata_amd 0000:00:08.0: version 0.4.1
pata_amd 0000:00:08.0: setting latency timer to 64
scsi1 : pata_amd
scsi2 : pata_amd
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
ahci 0000:00:0e.0: version 3.0
ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20
ahci 0000:00:0e.0: controller can do NCQ, turning on CAP_NCQ
ahci 0000:00:0e.0: controller can't do PMP, turning off CAP_PMP
ahci 0000:00:0e.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode
ahci 0000:00:0e.0: flags: 64bit ncq sntf led clo pio
ahci 0000:00:0e.0: setting latency timer to 64
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
scsi6 : ahci
ata3: SATA max UDMA/133 abar m8192@0xefff8000 port 0xefff8100 irq 20
ata4: SATA max UDMA/133 abar m8192@0xefff8000 port 0xefff8180 irq 20
ata5: SATA max UDMA/133 abar m8192@0xefff8000 port 0xefff8200 irq 20
ata6: SATA max UDMA/133 abar m8192@0xefff8000 port 0xefff8280 irq 20
ata2: port disabled--ignoring
usb 1-5: new high-speed USB device number 5 using ehci_hcd
Refined TSC clocksource calibration: 1799.999 MHz.
Switching to clocksource tsc
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata3.00: ATA-7: ST3500630AS, 3.CHN, max UDMA/100
ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata5.00: ATAPI: Optiarc DVD RW AD-7201S5, 1H0E, max UDMA/100
ata3.00: configured for UDMA/100
scsi 3:0:0:0: Direct-Access ATA ST3500630AS 3.CH PQ: 0 ANSI: 5
ata5.00: configured for UDMA/100
scsi 5:0:0:0: CD-ROM Optiarc DVD RW AD-7201S5 1H0E PQ: 0 ANSI: 5
usb 1-5: New USB device found, idVendor=154b, idProduct=006a
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-5: Product: USB 2.0 FD
usb 1-5: Manufacturer: PNY Technologies
usb 1-5: SerialNumber: 4F54067607AE6E8E
scsi7 : usb-storage 1-5:1.0
sd 3:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 sda6 >
sd 3:0:0:0: [sda] Attached SCSI disk
sd 3:0:0:0: Attached scsi generic sg0 type 0
sr 5:0:0:0: Attached scsi generic sg1 type 5
sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 5:0:0:0: Attached scsi CD-ROM sr0
usb 1-8: new high-speed USB device number 6 using ehci_hcd
usb 1-8: New USB device found, idVendor=0bda, idProduct=0111
usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-8: Product: USB2.0-CRW
usb 1-8: Manufacturer: Generic
usb 1-8: SerialNumber: 20021111153705700
scsi8 : usb-storage 1-8:1.0
PM: Starting manual resume from disk
PM: Hibernation image partition 8:5 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
usb 2-1: new full-speed USB device number 2 using ohci_hcd
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
scsi 0:0:0:0: Direct-Access Toshiba External USB 3.0 0201 PQ: 0 ANSI: 6
sd 0:0:0:0: Attached scsi generic sg2 type 0
sd 0:0:0:0: [sdb] 3907029160 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 0:0:0:0: [sdb] Write Protect is off
sd 0:0:0:0: [sdb] Mode Sense: 2b 00 00 00
sd 0:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 0:0:0:0: [sdb] Attached SCSI disk
usb 2-1: New USB device found, idVendor=093a, idProduct=2460
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1: Product: CIF Single Chip
usb 2-1: Manufacturer: Pixart Imaging Inc.
scsi 7:0:0:0: Direct-Access PNY USB 2.0 FD 0.00 PQ: 0 ANSI: 4
sd 7:0:0:0: Attached scsi generic sg3 type 0
sd 7:0:0:0: [sdc] 31384251 512-byte logical blocks: (16.0 GB/14.9 GiB)
sd 7:0:0:0: [sdc] Write Protect is off
sd 7:0:0:0: [sdc] Mode Sense: 23 00 00 00
sd 7:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1
sd 7:0:0:0: [sdc] Attached SCSI removable disk
usb 2-3: new full-speed USB device number 3 using ohci_hcd
scsi 8:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS
scsi 8:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS
scsi 8:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS
scsi 8:0:0:3: Direct-Access Generic- MS/MS-Pro 1.00 PQ: 0 ANSI: 0 CCS
sd 8:0:0:0: Attached scsi generic sg4 type 0
sd 8:0:0:1: Attached scsi generic sg5 type 0
sd 8:0:0:2: Attached scsi generic sg6 type 0
sd 8:0:0:3: Attached scsi generic sg7 type 0
usb 2-3: New USB device found, idVendor=413c, idProduct=1002
usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-3: Product: Dell USB Keyboard Hub
usb 2-3: Manufacturer: Dell
sd 8:0:0:0: [sdd] Attached SCSI removable disk
sd 8:0:0:1: [sde] Attached SCSI removable disk
sd 8:0:0:2: [sdf] Attached SCSI removable disk
sd 8:0:0:3: [sdg] Attached SCSI removable disk
hub 2-3:1.0: USB hub found
hub 2-3:1.0: 3 ports detected
usb 2-3.1: new full-speed USB device number 4 using ohci_hcd
usb 2-3.1: New USB device found, idVendor=413c, idProduct=2002
usb 2-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-3.1: Product: Dell USB Keyboard Hub
usb 2-3.1: Manufacturer: Dell
usb 2-3.2: new low-speed USB device number 5 using ohci_hcd
usb 2-3.2: New USB device found, idVendor=093a, idProduct=2510
usb 2-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-3.2: Product: USB Optical Mouse
usb 2-3.2: Manufacturer: PixArt
udevd[378]: starting version 175
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
wmi: Mapper loaded
coretemp coretemp.0: Using relative temperature scale!
coretemp coretemp.0: Using relative temperature scale!
input: PC Speaker as /devices/platform/pcspkr/input/input2
i2c i2c-0: nForce2 SMBus adapter at 0x1c00
i2c i2c-1: nForce2 SMBus adapter at 0x1c80
snd_hda_intel 0000:00:09.0: power state changed by ACPI to D0
snd_hda_intel 0000:00:09.0: power state changed by ACPI to D0
ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 23
hda_intel: Disabling MSI
snd_hda_intel 0000:00:09.0: setting latency timer to 64
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
hda_codec: ALC1200: BIOS auto-probing.
hda_codec: ALC1200: SKU not ready 0x411111f0
input: Dell Dell USB Keyboard Hub as /devices/pci0000:00/0000:00:04.0/usb2/2-3/2-3.1/2-3.1:1.0/input/input3
generic-usb 0003:413C:2002.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard Hub] on usb-0000:00:04.0-3.1/input0
input: Dell Dell USB Keyboard Hub as /devices/pci0000:00/0000:00:04.0/usb2/2-3/2-3.1/2-3.1:1.1/input/input4
generic-usb 0003:413C:2002.0002: input,hidraw1: USB HID v1.10 Device [Dell Dell USB Keyboard Hub] on usb-0000:00:04.0-3.1/input1
input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:04.0/usb2/2-3/2-3.2/2-3.2:1.0/input/input5
generic-usb 0003:093A:2510.0003: input,hidraw2: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:04.0-3.2/input0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
Linux media interface: v0.10
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:09.0/input/input6
Linux video capture interface: v2.00
gspca_main: v2.14.0 registered
gspca_main: pac207-2.14.0 probing 093a:2460
input: pac207 as /devices/pci0000:00/0000:00:04.0/usb2/2-1/input/input7
usbcore: registered new interface driver pac207
input: HDA NVidia Headphone as /devices/pci0000:00/0000:00:09.0/sound/card0/input8
ACPI: PCI Interrupt Link [AIGP] enabled at IRQ 22
nvidia 0000:00:10.0: setting latency timer to 64
vgaarb: device changed decodes: PCI:0000:00:10.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 304.88 Wed Mar 27 14:26:46 PDT 2013
Adding 3905532k swap on /dev/sda5. Priority:-1 extents:1 across:3905532k
EXT4-fs (sda1): re-mounted. Opts: (null)
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
loop: module loaded
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
forcedeth 0000:00:0f.0: irq 43 for MSI/MSI-X
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
fuse init (API version 7.17)
FAT-fs (sdc1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
usb 1-6: new high-speed USB device number 7 using ehci_hcd
usb 1-6: New USB device found, idVendor=04e8, idProduct=6860
usb 1-6: New USB device strings: Mfr=2, Product=3, SerialNumber=4
usb 1-6: Product: SAMSUNG_Android
usb 1-6: Manufacturer: SAMSUNG
usb 1-6: SerialNumber: 4df17ed22de58fcd
cdc_acm 1-6:1.1: This device cannot do calls on its own. It is not a modem.
cdc_acm 1-6:1.1: ttyACM0: USB ACM device
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
usb 1-6: USB disconnect, device number 7
usb 2-3.2: USB disconnect, device number 5
usb 2-3.2: new low-speed USB device number 6 using ohci_hcd
usb 2-3.2: New USB device found, idVendor=093a, idProduct=2510
usb 2-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-3.2: Product: USB Optical Mouse
usb 2-3.2: Manufacturer: PixArt
input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:04.0/usb2/2-3/2-3.2/2-3.2:1.0/input/input9
generic-usb 0003:093A:2510.0004: input,hidraw2: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:04.0-3.2/input0
usb 1-6: new high-speed USB device number 8 using ehci_hcd
usb 1-6: New USB device found, idVendor=04e8, idProduct=6860
usb 1-6: New USB device strings: Mfr=2, Product=3, SerialNumber=4
usb 1-6: Product: SAMSUNG_Android
usb 1-6: Manufacturer: SAMSUNG
usb 1-6: SerialNumber: 4df17ed22de58fcd
cdc_acm 1-6:1.1: This device cannot do calls on its own. It is not a modem.
cdc_acm 1-6:1.1: ttyACM0: USB ACM device
usb 1-6: USB disconnect, device number 8
usb 1-6: new high-speed USB device number 9 using ehci_hcd
usb 1-6: New USB device found, idVendor=04e8, idProduct=6860
usb 1-6: New USB device strings: Mfr=2, Product=3, SerialNumber=4
usb 1-6: Product: SAMSUNG_Android
usb 1-6: Manufacturer: SAMSUNG
usb 1-6: SerialNumber: 4df17ed22de58fcd
cdc_acm 1-6:1.1: This device cannot do calls on its own. It is not a modem.
cdc_acm 1-6:1.1: ttyACM0: USB ACM device
usb 1-6: USB disconnect, device number 9
usb 1-6: new high-speed USB device number 10 using ehci_hcd
hub 1-0:1.0: unable to enumerate USB device on port 6
usb 2-6: new full-speed USB device number 7 using ohci_hcd
usb 2-6: not running at top speed; connect to a high speed hub
usb 2-6: New USB device found, idVendor=04e8, idProduct=6860
usb 2-6: New USB device strings: Mfr=2, Product=3, SerialNumber=4
usb 2-6: Product: SAMSUNG_Android
usb 2-6: Manufacturer: SAMSUNG
usb 2-6: SerialNumber: 4df17ed22de58fcd
cdc_acm 2-6:1.1: This device cannot do calls on its own. It is not a modem.
cdc_acm 2-6:1.1: ttyACM0: USB ACM device
usb 2-6: USB disconnect, device number 7
usb 1-6: new high-speed USB device number 11 using ehci_hcd
usb 1-6: New USB device found, idVendor=04e8, idProduct=6860
usb 1-6: New USB device strings: Mfr=2, Product=3, SerialNumber=4
usb 1-6: Product: SAMSUNG_Android
usb 1-6: Manufacturer: SAMSUNG
usb 1-6: SerialNumber: 4df17ed22de58fcd
cdc_acm 1-6:1.1: This device cannot do calls on its own. It is not a modem.
cdc_acm 1-6:1.1: ttyACM0: USB ACM device
usb 1-6: USB disconnect, device number 11
usb 1-6: new high-speed USB device number 12 using ehci_hcd
usb 1-6: New USB device found, idVendor=04e8, idProduct=6860
usb 1-6: New USB device strings: Mfr=2, Product=3, SerialNumber=4
usb 1-6: Product: SAMSUNG_Android
usb 1-6: Manufacturer: SAMSUNG
usb 1-6: SerialNumber: 4df17ed22de58fcd
cdc_acm 1-6:1.1: This device cannot do calls on its own. It is not a modem.
cdc_acm 1-6:1.1: ttyACM0: USB ACM device
usb 1-6: USB disconnect, device number 12
usb 1-6: new high-speed USB device number 13 using ehci_hcd
usb 1-6: New USB device found, idVendor=04e8, idProduct=6860
usb 1-6: New USB device strings: Mfr=2, Product=3, SerialNumber=4
usb 1-6: Product: SAMSUNG_Android
usb 1-6: Manufacturer: SAMSUNG
usb 1-6: SerialNumber: 4df17ed22de58fcd
cdc_acm 1-6:1.1: This device cannot do calls on its own. It is not a modem.
cdc_acm 1-6:1.1: ttyACM0: USB ACM device
usb 1-6: USB disconnect, device number 13
hub 1-0:1.0: unable to enumerate USB device on port 6
usb 1-6: new high-speed USB device number 15 using ehci_hcd
usb 1-6: New USB device found, idVendor=04e8, idProduct=6860
usb 1-6: New USB device strings: Mfr=2, Product=3, SerialNumber=4
usb 1-6: Product: SAMSUNG_Android
usb 1-6: Manufacturer: SAMSUNG
usb 1-6: SerialNumber: 4df17ed22de58fcd
cdc_acm 1-6:1.1: This device cannot do calls on its own. It is not a modem.
cdc_acm 1-6:1.1: ttyACM0: USB ACM device
usb 1-6: USB disconnect, device number 15
usb 1-6: new high-speed USB device number 16 using ehci_hcd
usb 1-6: New USB device found, idVendor=04e8, idProduct=6860
usb 1-6: New USB device strings: Mfr=2, Product=3, SerialNumber=4
usb 1-6: Product: SAMSUNG_Android
usb 1-6: Manufacturer: SAMSUNG
usb 1-6: SerialNumber: 4df17ed22de58fcd
cdc_acm 1-6:1.1: This device cannot do calls on its own. It is not a modem.
cdc_acm 1-6:1.1: ttyACM0: USB ACM device
usb 1-6: USB disconnect, device number 16
usb 1-6: new high-speed USB device number 17 using ehci_hcd
usb 1-6: New USB device found, idVendor=04e8, idProduct=6860
usb 1-6: New USB device strings: Mfr=2, Product=3, SerialNumber=4
usb 1-6: Product: SAMSUNG_Android
usb 1-6: Manufacturer: SAMSUNG
usb 1-6: SerialNumber: 4df17ed22de58fcd
cdc_acm 1-6:1.1: This device cannot do calls on its own. It is not a modem.
cdc_acm 1-6:1.1: ttyACM0: USB ACM device
usb 1-6: USB disconnect, device number 17
usb 1-6: new high-speed USB device number 18 using ehci_hcd
usb 1-6: New USB device found, idVendor=04e8, idProduct=6860
usb 1-6: New USB device strings: Mfr=2, Product=3, SerialNumber=4
usb 1-6: Product: SAMSUNG_Android
usb 1-6: Manufacturer: SAMSUNG
usb 1-6: SerialNumber: 4df17ed22de58fcd
cdc_acm 1-6:1.1: This device cannot do calls on its own. It is not a modem.
cdc_acm 1-6:1.1: ttyACM0: USB ACM device
usb 1-6: USB disconnect, device number 18
usb 1-6: new high-speed USB device number 19 using ehci_hcd
usb 1-6: New USB device found, idVendor=04e8, idProduct=6860
usb 1-6: New USB device strings: Mfr=2, Product=3, SerialNumber=4
usb 1-6: Product: SAMSUNG_Android
usb 1-6: Manufacturer: SAMSUNG
usb 1-6: SerialNumber: 4df17ed22de58fcd
cdc_acm 1-6:1.1: This device cannot do calls on its own. It is not a modem.
cdc_acm 1-6:1.1: ttyACM0: USB ACM device
usb 1-6: USB disconnect, device number 19
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-6: new high-speed USB device number 20 using ehci_hcd
usb 1-6: New USB device found, idVendor=04e8, idProduct=6860
usb 1-6: New USB device strings: Mfr=2, Product=3, SerialNumber=4
usb 1-6: Product: SAMSUNG_Android
usb 1-6: Manufacturer: SAMSUNG
usb 1-6: SerialNumber: 4df17ed22de58fcd
cdc_acm 1-6:1.1: This device cannot do calls on its own. It is not a modem.
cdc_acm 1-6:1.1: ttyACM0: USB ACM device
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-6: USB disconnect, device number 20
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-8: reset high-speed USB device number 6 using ehci_hcd
usb 1-6: new high-speed USB device number 21 using ehci_hcd
usb 1-6: New USB device found, idVendor=04e8, idProduct=6860
usb 1-6: New USB device strings: Mfr=2, Product=3, SerialNumber=4
usb 1-6: Product: SAMSUNG_Android
usb 1-6: Manufacturer: SAMSUNG
usb 1-6: SerialNumber: 4df17ed22de58fcd
cdc_acm 1-6:1.1: This device cannot do calls on its own. It is not a modem.
cdc_acm 1-6:1.1: ttyACM0: USB ACM device
usb 1-6: USB disconnect, device number 21
usb 1-6: new high-speed USB device number 22 using ehci_hcd
usb 1-6: device not accepting address 22, error -71
hub 1-0:1.0: unable to enumerate USB device on port 6
usb 1-6: new high-speed USB device number 24 using ehci_hcd
usb 1-6: New USB device found, idVendor=04e8, idProduct=6860
usb 1-6: New USB device strings: Mfr=2, Product=3, SerialNumber=4
usb 1-6: Product: SAMSUNG_Android
usb 1-6: Manufacturer: SAMSUNG
usb 1-6: SerialNumber: 4df17ed22de58fcd
cdc_acm 1-6:1.1: This device cannot do calls on its own. It is not a modem.
cdc_acm 1-6:1.1: ttyACM0: USB ACM device
usb 1-6: USB disconnect, device number 24
usb 1-6: new high-speed USB device number 25 using ehci_hcd
usb 1-6: New USB device found, idVendor=04e8, idProduct=6860
usb 1-6: New USB device strings: Mfr=2, Product=3, SerialNumber=4
usb 1-6: Product: SAMSUNG_Android
usb 1-6: Manufacturer: SAMSUNG
usb 1-6: SerialNumber: 4df17ed22de58fcd
cdc_acm 1-6:1.1: This device cannot do calls on its own. It is not a modem.
cdc_acm 1-6:1.1: ttyACM0: USB ACM device
usb 1-6: USB disconnect, device number 25
usb 1-6: new high-speed USB device number 26 using ehci_hcd
usb 1-6: New USB device found, idVendor=04e8, idProduct=6860
usb 1-6: New USB device strings: Mfr=2, Product=3, SerialNumber=4
usb 1-6: Product: SAMSUNG_Android
usb 1-6: Manufacturer: SAMSUNG
usb 1-6: SerialNumber: 4df17ed22de58fcd
cdc_acm 1-6:1.1: This device cannot do calls on its own. It is not a modem.
cdc_acm 1-6:1.1: ttyACM0: USB ACM device